Well Accessaries factory

[ Nach unten  |  Zum letzten Beitrag  |  Thema abonnieren  |  Neueste Beiträge zuerst ]


gayle2ake

91, Männlich

  Craftkind

Beiträge: 10

Well Accessaries factory

von gayle2ake am 14.06.2023 03:31

Well Accessaries factory Elevators Type DD
Product description
Model DD center latch elevators with square shoulder are suitable for handing drill collars, casing and tubings. The load ranges from 150 tons to 350 tons and the size ranges from 2 3/8 to 5 1/2. The products shall be designed and manufactured according to API Spec 8A/8C Specification for drilling and production hoisting equipment.

 

Specifications
ModelSize (in)
Rated Capacity (short tons)
DPCASINGTUBING
DD-1002 3/8 to 5 1/24 1/2 to 5 1/22 3/8 to 4 1/2150
DD-2502 3/8 to 5 1/24 1/2 to 5 1/22 3/8 to 4 1/2250
DD-3502 3/8 to 5 1/24 1/2 to 5 1/22 3/8 to 4 1/2350
Elevators Type DDZ
Product description
DDZ series elevators are center latch elevators with 18 degree taper shoulder, applied in handing the drill pipes and drilling tools, etc. The load ranges from 100 tons to 750 tons and the size ranges from 2 3/8 to 6 5/8.The products shall be designed and manufactured according to the requirements in API Spec 8A/8C Specification for drilling and production hoisting equipment.
Specifications
ModelSize(in)Rated Capacity (short tons)Remark
DDZ-1002 3/8-5100MG
DDZ-1502 3/8-5 1/2150RG
DDZ-2502 3/8-5 1/2250MGG
DDZ-3503 1/2-5 7/8350GG
DDZ-350TD3 1/2-5 7/8350FRO TOP DRIVE
DDZ-5003 1/2-6 5/8500HGG
DDZ-500TD3 1/2-6 5/8500FOR TOP DRIVE
DDZ-7504-6 5/8750
Elevators Type CDZ
Product description
CDZ drill pipe elevators are mainly used in the handing and hoisting drill pipes with 18 degree taper and tools in oil drilling, natural gas drilling and well construction. The products shall be designed and manufactured according to API Spec 8A/8C Specification for drilling and production hoisting equipment.
Specifications
ModelSize (in)Rated Capacity (short tons)
CDZ-1502 3/8-5 1/2150
CDZ-2502 3/8-5 1/2250
CDZ-3502 7/8-5 1/2350
CDZ-5003 1/2-5 1/2500
Elevators Type TA
Product description
Model TA center latch elevators with square shoulder are suitable for handling drill pipes, drill collars, casings and tubings. The products shall be designed and manufactured according to API Spec 8A/8C Specification for drilling and production hoisting equipment.
Specifications
ModelSize (in)Rated Capacity (short tons)
DCTubingCASING
NUEU
TA-352 7/8-3 1/81.05-2 7/81.05-2 7/8/35
TA-652 7/8-3 1/81.66-2 7/81.66-2 7/8/65
TA-1003 1/8-5 1/42 3/8-52 3/8-4 1/2/100
TA-1253 1/8-5 1/42 3/8-52 3/8-4 1/2/125
TA-1504 1/8-11 1/4//4 1/2-10 3/4150
Elevators Type CD
Product description
Model CD side door elevators with square shoulder are suitable for handing tubings, casings, drill pipes and drill collars in oil drilling, natural gas drilling and well construction. The products shall be designed and manufactured according to API Spec 8A/8C Specification for drilling and production hoisting equipment.
Specifications
ModelSize (in)Rated Capacity (short tons)
CD-1002 3/8-5 1/2100
CD-1502 3/8-14150
CD-2002 3/8-14200
CD-2502 3/8-20250
CD-3504 1/2-20350
CD-5004 1/2-14500
CD-7504 1/2-9 7/8750
Elevators Type SX
Product description
Model SX side door elevators with square shoulder are suitable for handing casings in oil drilling, natural gas drilling and well construction. The products shall be designed and manufactured according to API Spec 8A/8C Specification for drilling and production hoisting equipment.
Specifications
ModelSize (in)Rated Capacity (short tons)
SX 7-16
7350-500
9 5/8
9 7/8
10 3/4
11 3/4
12 3/4
12 7/8
13 3/8
13 3/8
14
16
SX 18 5/8 - 2018 5/8
20
Elevators Type SLX
Product description
Model SLX side door elevators with square shoulder are suitable for handling tubings , casing, drill pipes and drill collars in oil drilling, natural gas drilling and well construction. The products shall be designed and manufactured according to API Spec 8A/8C Specification for drilling and production hoisting equipment.
Specifications
Model Size (in)Rated Capacity (short tons)
SLX-653 1/2-14 1/465
SLX-1002 3/8-5 3/4100
SLX-1505 1/2-13 5/8150
SLX-2505 1/2-30250
SLX-3504 1/2-14350
Y Series Type Elevators
Product description
The slip type elevators are indispensable tools in handling and hoisting drill pipes, casings and tubings in oil drilling and well tripping operation. It's especially suitable for hoisting integrated tubing sub, integral joint casing and electric submersible pump column.The products shall be designed and manufactured according to API Spec 8A/8C Specification for drilling and production hoisting equipment.
Specifications
ModelSize mm(in)Rated Capacity
kNshort tons
HYT60.3-88.9(2 3/8-3 1/2)1350150
YT33.4-88.9(1.315-3 1/2)67575
MYT33.4-73(1.315-2 7/8)36040
LYT26.7-52.4(1.05-1 1/16)18020
HYC88.9-139.7(3 1/2-7 5/8)1800200
MYC88.9-117.8(3 1/2-7)1125125
YC88.9-117.8(3 1/2-7)67575
Single Joint Elevators Type SJ(Auxiliary Elevators)
Product description
SJ series auxiliary elevators are mainly used in handling single casings or tubings in oil drilling natural gas drilling and cementing operation. The products shall be designed and manufactured according to API Spec 8A/8C Specification for drilling and production hoisting equipment.
Specifications
SizeRated Capacity(kN)
inmm45
2 3/8-2 7/860.3-73.03
3 1/2-4 3/488.9-120.7
5-5 3/4127-146.1
6-7 3/4152.4-193.7
8 5/8-10 3/4219.1-273.1
11 3/4-13 3/8298.5-339.7
13 5/8-14346.1-355.6
16-20406.4-508.0
21 1/2-24 1/2546.1-622.360
26-28660.4-711.2
30-36762.0-914.4
Single Joint Elevators Type SP(Auxiliary Elevators)
Product description
SP series auxiliary elevators are mainly used in handling single tubings, casings and drill pipe with taper shoulder. The products shall be designed and manufactured according to API Spec 8A/8C Specification for drilling and production hoisting equipment.

Specifications
ModelSize (in)Rated Capacity (short tons)
SP5''2 3/8-10 3/45
SP12''2 3/8-4 1/2
SP18''2 7/8-6 5/8
Single Joint Elevators Type SJX(Auxiliary Elevators)
Product description
SJX series auxiliary elevators are hoisting tools for handling single pipes or working together with the professional tools CRT to move the tubulars from gate to well centre.The products shall be designed and manufactured according to API Spec 8A/8C Specification for drilling and production hoisting equipment.
Specifications
ModelSize (in)Rated Capacity (short tons)
SJX-52 3/8-4 1/25
SJX-54 1/2-7
SJX-57-10
SJX-510-14
Hydraulic Elevators Type DDZH
Product description
Hydraulic elevators type DDZH is a center latch elevator. Through changing the bushing, it can handle drill pipes, drill collars, casings and tubings. By using the hydraulic-controlled system, it can make the operation more convenient, reduce the workers' labor intensity effectively and improve work efficiency. It can also realize remote controlling and make the using safer and more reliable.The products shall be designed and manufactured according to API Spec 8A/8C Specification for drilling and production hoisting equipment.
Specifications
ModelTubular &Size
(in)Rated Capacity (short tons)
WITH 18° taper
CasingDCTubing
DDZH-2502 3/8-54 1/2-53 1/8-5 1/42 3/8-4 1/2250
DDZH-3502 3/8-6 5/84 1/2-73 1/8-6 3/42 3/8-5 1/2350
DDZH-5002 3/8-6 5/84 1/2-73 1/2-6 3/4/500
Hydraulic Elevator Type CDZH
Product description
Hydraulic elevator type CDZH is a side door elevator with double-value structure. Through changing the bushing, it can handle pipes, drill collars, casings and tubings. By using the hydraulic-controlled system, it can make the operation more convenient, reduce the workers' labor intensity effectively and improve the work efficiency. It can also realize remote controlling and make the using safer and more reliable. The products shall be designed and manufactured according to API Spec 8A/8C Specification for drilling and production hoisting equipment.
Specifications
ModelTubular &Size
(in)Rated Capacity (short tons)
WITH 18° taper
CasingDCTubing
CDZH-5003 1/2-6 5/84 1/2-9 5/84 3/4-5 9 3/42 3/8-4 1/2500
Air -operated Elevator
Product description
Air operated Elevators are conventional elevators to which power actuation has been added. This feature permits remote opening and closing of the elevators. It can meet normal working requirement in oil drilling & workover and also reduce workload. They are designed and manufactured according to API Spec 8A/8C Specification for drilling and production hoisting equipment.
Specifications
ModelApplicable diameter of tubulars (in)Rated Capacity (short tons)
DD-1504 1/8-8 5/8150
DDZ-5003 1/2-6 5/8500Well Accessaries factory
website:http://www.oawellscreen.com/well-accessaries/

Antworten Zuletzt bearbeitet am 14.06.2023 03:31.

« zurück zum Forum